Digital strain gauge amplifier
Type: E-ADLM-HD
Description
The analog mV/V output signal supplied by the strain gauge sensors is processed by the digital measuring amplifiers and converted into a corresponding output signal.
Besides programming the E-ADLM-HD via serial interface, it is possible with the keys of the display, too.
Technical features
- Input: up to 4 strain gauge full bridges
- Input sensitivity: 0,1...5 mV/V
- Analog output: 4...20 mA / 0...10 V
- Voltage supply: 24 VDC +/-30%
- Resolution: 12 / 14 / 15 / 16 bit
- Combined error: 0,2% of end scale value
- Optionally: limit value switch / interface / vibration protection
- Degree of protection: IP65
- Adjustment: via RS232 interface
- Interface: RS485 / CANopen / Profibus
Application
The measuring amplifier is suitable in installations, where in heavy conditions a load/force measuring is necessary. With its options and the comfortable adjustment via interface the amplifier is for unniversal use, eg in container terminals, silo works or overhead cranes.
