Data logger handheld for load cells
Description
EPD is a measuring amplifier with an integrated data logger, which is used either as hand device or for the stationary application. It has very compact dimensions and fits in any pocket.
The measuring amplifier has an integrated bridge completion for 120 Ohm, 350 Ohm and 1000 Ohm strain guages. The SD card slot and the USB interface are closed by an additional cover.
The measurement data is stored with time stamp. Different oparate modes, such as single value query, permanent record, triggering via control cable, min-max mode and other settings are possible.
Recording on SD-card is possible up to 1000 Hz.
Highlights
- Data logger with SD-card slot
- USB-interface
- for straingauge quarter, half and full
- bridges 0...10V, potentiometric
- 24 bit resolution
- 6 sensor configurations reccalable
- battery operation
- realtime clock
- IP65 execution as option
- 3750Hz measuring rate
- Data logger with SD-card slot
- USB-interface
- for straingauge quarter, half and full
- bridges 0...10V, potentiometric
- 24 bit resolution
- 6 sensor configurations reccalable
- battery operation
- realtime clock
- IP65 execution as option
- 3750Hz measuring rate
- Real-time curve display, view the force status during the work process.
- Real-time automatic capture of equipment peak and valley values, analysis of sensor status.
- 3200mAh battery, can work continuously for 15 hours when fully charget
- The battery can be charget and discharged about 1,000 times
- The upload rate of wireless communication is 20HZ
- The acquisition rate of peak and valley is 80Hz
- Working environment -20°C to 50°C
- The weight of the meter is about 290g
- Protection grade IP65
