Shear Beam Load Cells
Shear beam load cells are mainly used for compressive forces.
Typical applications
The applications are primarily in belt scales, container scales, platform scales in the middle range, floor scales, silo scales, big bag scales, checkweighers or filling systems. Shear beam load cells are also suitable for torque and force measurement. For platform scales, several shear beam load cells are often connected in parallel.
Features
- Material: Stainless steel
- Capacity: many different capacity available on request
- Protection class: IP68
- Robust design for harsh industrial environment
- Compatible with other manufacturers
- Optional: integrated measuring amplifier (4...20mA, ±10V or 0...10V)
- Optional: integrated IO-Link measuring amplifier
- ATEX, IECEx, CSA
- Optional: calibration ÖNORM EN ISO/IEC 17025
- High temperature: -50°C...+150°C
Since shear beam load cells are mainly used in industrial weighing technology, they are built to be sturdy. Because of this, our shear beam load cells are mainly made of stainless steel with the corresponding protection class IP68. Important parameters are the nominal, breaking or limiting load. A parallel connection of several shear beam load cells can easily be implemented. Adjustment is no longer necessary, as most load cells are compatible with other models and manufacturers.
If you cannot find what you are looking for in the product portfolio below, please do not hesitate to contact us. We are continuously expanding our portfolio and we are sure to find a solution for your metrological needs.
| Specifications | Technique |
|---|---|
| Capacity | 0.11t - WCF-0.11 0.22t - WCF-0.22 0.55t - WCF-0.55 1.1t - WCF-1.1 1.76t - WCF-1.76 2.2t - WCF-2.2 4.4t - WCF-4.4 |
| Accuracy class | C3 |
| Sensitivity | 1.94±0.1%mV/V |
| Zero balance | ±2%F.S. |
| Non-linearity | 0.017%F.S. |
| Hysteresis | 0.017%F.S. |
| Repeatability | 0.017%F.S. |
| Creep{30min) | 0.0166%F.S. |
| Repeatability | 0.017%F.S. |
| Temp.effect on output | 0.014%F.S./10 °C |
| Temp.effect on zero | 0.0125%F.S./10 °C |
| Input impedance | 390±3Ω |
| Output impedance | 350±5Ω |
| Insulation | ≥5000M Ω /1 OOVDC |
| Recommended excitation | 5V |
| Maximum excitation Voltage | 15V |
| Compensated temp range | -10∼40°C |
| Operating temperature range | -30∼70°C |
| Safe load limit | 150%F.S. |
| Breaking load | 300%F.S. |
| Cable size | ∅ 5.4 x 1500mm |
| Weight approx. | 0.9kg (0.55-1.76t), 1.6kg(2.2t), 2.2kg(4.4t) |
| Material | Stainless Steel |
| IP Class | IP68 |
| Cap(t) | A | B | C | D | E | F | G | H | J | M |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.11-1.76 | 133.4 | 76.2 | 25.4 | 15.4 | 30.7 | 30.2 | 57.7 | 14.2 | 13 | M12 |
| 2.2 | 136.6 | 76.2 | 25.4 | 18.4 | 36.8 | 36.6 | 57.9 | 17 | 13 | M12 |
| 4.4 | 171.5 | 95.2 | 38.1 | 21.5 | 42.9 | 42.9 | 73.8 | 20.1 | 19 | M20 |
| Specifications | Technique |
|---|---|
| Capacity | 0.11t - WCG-0.11 0.22t - WCG-0.22 0.55t - WCG-0.55 1.1t - WCG-1.1 1.76t - WCG-1.76 2.2t - WCG-2.2 4.4t - WCG-4.4 |
| Accuracy class | C3 |
| Sensitivity | 1.94±0.1%mV/V |
| Zero balance | ±2%F.S. |
| Non-linearity | 0.017%F.S. |
| Hysteresis | 0.017%F.S. |
| Repeatability | 0.017%F.S. |
| Creep{30min) | 0.0166%F.S. |
| Repeatability | 0.017%F.S. |
| Temp.effect on output | 0.014%F.S./10 °C |
| Temp.effect on zero | 0.0125%F.S./10 °C |
| Input impedance | 390±3Ω |
| Output impedance | 350±5Ω |
| Insulation | ≥5000M Ω /1 OOVDC |
| Recommended excitation | 5∼15V |
| Maximum excitation Voltage | 20V |
| Compensated temp range | -10∼40°C |
| Operating temperature range | -30∼70°C |
| Safe load limit | 150%F.S. |
| Breaking load | 300%F.S. |
| Cable size | ∅ 5.4 x 1500mm |
| Weight approx. | 0.9kg (0.55-1.76t), 1.6kg(2.2t), 2.2kg(4.4t) |
| Material | Stainless Steel |
| IP Class | IP68 |
| Cap(t) | A | B | C | D | E | F | G | H | J | M |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.11-1.76 | 133.4 | 76.2 | 25.4 | 15.4 | 30.7 | 30.2 | 57.7 | 14.2 | 13 | Φ 15.9 |
| 2.2 | 136.6 | 76.2 | 25.4 | 18.4 | 36.8 | 36.6 | 57.9 | 17 | 13 | Φ 15.9 |
| 4.4 | 171.5 | 95.2 | 38.1 | 21.5 | 42.9 | 42.9 | 73.8 | 20.1 | 19 | Φ 22.2 |
| Specifications | Technique |
|---|---|
| Capacity | 75kg - WCTP-75 150kg - WCTP-150 300kg - WCTP-300 500kg - WCTP-500 750kg - WCTP-750 1000kg - WCTP-1000 1500kg - WCTP-1500 2000kg - WCTP-2000 3000kg - WCTP-3000 5000kg - WCTP-5000 10000kg - WCTP-10000 |
| Accuracy class | C3 |
| Sensitivity | 2.0 ±0.1%mV/V |
| Zero balance | ±2%F.S. |
| Non-linearity | 0.017%F.S. |
| Hysteresis | 0.017%F.S. |
| Repeatability | 0.017%F.S. |
| Creep{30min) | 0.0166%F.S. |
| Repeatability | 0.017%F.S. |
| Temp.effect on output | 0.0012%F.S./10°C |
| Temp.effect on zero | 0.002%F.S./10°C |
| Input impedance | 385±10Ω |
| Output impedance | 350±3Ω |
| Insulation | ≥5000M Ω /100VDC |
| Recommended excitation | 5∼15V |
| Maximum excitation Voltage | 15V |
| Compensated temp. range | -10∼40°C |
| Operating temp. range | -20∼70°C |
| Safe load limit | 150%F.S. |
| Breaking load | 200%F.S. |
| Cable size | ∅ 5.0 x 5000mm |
| Material | Stainless Steel |
| IP Class | IP68 |
| Specifications | Technique |
|---|---|
| Material | 17-4 PH stainless steel |
| OIML R60 Accuracy class / Verification intervals |
|
| Nominal load (E max) |
|
| Minimum verification interval (V min) |
|
| Combined error |
|
| Protection class | IP68 |
| Rated output | 2 mV/V ±0.2% |
| Temperature effect on zero | ±0.0018% °C |
| Temperature effect on span | ±0.0014% °C |
| Compensated temperature range | -10 °C / +40°C |
| Operating temperature range | -35 °C / +65 °C |
| Creep at nominal load in 30 minutes | 0.02% |
| Max supply voltage without damage | 18 V |
| Input resistance | 350 Ω ±3.5 |
| Output resistance | 350 Ω ±3.5 |
| Zero balance | ≤±1% |
| Insulation resistance | ≥5000 MΩ |
| Safe overload (% of full scale) | 150% |
| Ultimate overload (% of full scale) | 300% |
| Deflection at nominal load | 0.4 mm |
| Electrical Connections | |
| Cable lenght | 5 m (500-7500 kg); 10 m (10000 kg) |
| Cable diameter | 5 mm |
| Cores | 4/6 x 0.20 mm² |
