Compression Column Load Cells
Description
The symmetrically constructed compression column load cells are used to measure compressive forces in a wide variety of industrial applications. They are very compact and deliver extremely precise and reproducible measurement results, even in long-term use in harsh industrial environments.
This compressive load cell is particularly suitable for use in container, bunker and vehicle scales. Four square pillars on which strain gauges (DMS) are positively attached serve as the measuring element. Due to this special "four-column construction", the load cells are generally insensitive to eccentric loads. The applied load causes elastic deformation of the columns. The applied strain gauges deliver a measuring voltage proportional to the load. The compression load cell is calibratable according to OIML, R60. It is made of high-quality, stainless steel, laser-welded and meets the requirements of protection class IP68.
Features
- AISI 4340 Nickel Plated Steel Construction
- Combined Error < +/- 0.014 %
- Protection Rating IP 69K
- Accuracy Class C5 (OIML R60)
- Two-Connector Digital Output
Application
Silo and tank weighing, container scales, vehicle scales, track scales, as well as force measurements in the process industry. Can also be used as a column force sensor after calibration in Newtons.
Specifications | Technique |
---|---|
Material | AISI 4340 nickel plated steel |
OIML R60 Accuracy class / Verification intervals | C5 / 5000 |
Nominal load (E max) | 25000 - 50000 kg |
Minimum verification interval (V min) | E max / 10000 |
Combined error | ≤±0.014% |
Protection class | IP69K |
Temperature effect on zero | 0.0015% °C |
Temperature effect on span | 0.0015% °C |
Compensated temperature range | -10 °C / +40 °C |
Operating temperature range | -30 °C / +70 °C |
Creep at nominal load in 30 minutes | 0.02% |
Max supply voltage without damage | 20 VDC |
Recommended power supply voltage | 9÷12 VDC |
Safe overload (% of full scale) | 150% |
Ultimate overload (% of full scale) | 300% |
RS485 serial interface | Halfduplex |
Maximum transmission distance | 1200 m |
Electrical Connections | |
Cable lenght | 7 m |
Cable diameter | 8.8 mm |
Cores | 4 x 0.2 mm2 |
Specifications | Technique |
---|---|
Material | 17-4 PH stainless steel |
OIML R60 Accuracy class / Verification intervals | C4 / 4000 |
Nominal load (E max) | 25000 kg |
Minimum verification interval (V min) | E max/15000 |
Combined error | ≤±0.017% |
Protection class | IP68 |
Rated output | 2 mV/V ±1% |
Temperature effect on zero | 0.002% °C |
Temperature effect on span | 0.002% °C |
Compensated temperature range | -10 °C / +40 °C |
Operating temperature range | -30 °C / +65 °C |
Creep at nominal load in 30 minutes | 0.02% |
Max supply voltage without damage | 18 VDC |
Input resistance | 700 Ω ±7 |
Output resistance | 700 Ω ±7 |
Zero balance | ±1% |
Insulation resistance | ≥5000 MΩ |
Safe overload (% of full scale) | 150% |
Ultimate overload (% of full scale) | 300% |
Deflection at nominal load | 0.6 - 1 mm |
Electrical Connections | |
Cable lenght | 15 m |
Cable diameter | 5 mm |
Cores | 4 x 0.24 mm2 |
Specifications | Technique |
---|---|
Material | AISI 4340 nickel plated steel |
OIML R60 Accuracy class / Verification intervals | C3 / 3000 |
Nominal load (E max) | 15000 - 50000 kg |
Minimum verification interval (V min) | E max/10000 |
Combined error | ≤±0.02% |
Protection class | IP68 |
Rated output | 2 mV/V ±0.1% |
Temperature effect on zero | 0.002% °C |
Temperature effect on span | 0.002% °C |
Compensated temperature range | -10 °C / +40 °C |
Operating temperature range | -30 °C / +70 °C |
Creep at nominal load in 30 minutes | 0.02% |
Max supply voltage without damage | 15 VDC |
Input resistance | 780 Ω ±20 |
Output resistance | 700 Ω ±10 |
Zero balance | ±1% |
Insulation resistance | ≥5000 MΩ |
Safe overload (% of full scale) | 150% |
Ultimate overload (% of full scale) | 250% |
Deflection at nominal load | 0.6 - 1 mm |
Electrical Connections | |
Cable lenght | 20 m |
Cable diameter | 6 mm |
Cores | 6 x 0.22 mm2 |
Specifications | Technique |
---|---|
Material | 17-4 PH stainless steel |
OIML R60 Accuracy class / Verification intervals | C4 / 4000 |
Nominal load (E max) | 30000 - 60000 kg |
Minimum verification interval (V min) | E max/10000 |
Combined error | ≤±0.017% |
Protection class | IP68 |
Rated output | 2 mV/V ±0.1% |
Temperature effect on zero | 0.002% °C |
Temperature effect on span | 0.0012% °C |
Compensated temperature range | -10 °C / +40 °C |
Operating temperature range | -30 °C / +70 °C |
Creep at nominal load in 30 minutes | 0.016% |
Max supply voltage without damage | 15 VDC |
Input resistance | 800 Ω ±30 |
Output resistance | 700 Ω ±10 |
Zero balance | ±2% |
Insulation resistance | ≥5000 MΩ |
Safe overload (% of full scale) | 120% |
Ultimate overload (% in full scale) | 200% |
Deflection at nominal load | 0.6 - 1 mm |
Electrical Connections | |
Cable lenght | 20 m |
Cable diameter | 6 mm |
Cores | 6 x 0.22 mm2 |